Online Catalogue | Skis | Armada Skis
Quantity:
SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)The JJ remains without a peer in the back and side-country versatility. Thanks to the creatively applied EST freeride rockers and profile geometry, the JJ surfs to the cat track and carves to the lift. JP Auclair and Julien Regnier didn't simply redesign their signature ski - they revolutionized it. The JJ takes powder-specific concepts like the rocker, camber and variable sidecut and applies them to what might be the first true all-mountain powder ski. The JJ has a rockered tip and tail, but camber underfoot. The 5 dimensional design places the wider hinge points closer to the ski's centre for better floatation in powder and enough sidecut to carve turns on hard packed snow. Such a unique design requires unique construction, provided seamlessly by the hybrid AR50 sidewall and core. JP and Julien are credited with having irrevocably changed skiing. Now, they've irrevocably changed skis, too.FeaturesAR50 SidewallABS sidewall meets Cap construction - the best of both worlds. This engineering method combines the lightweight cap construction in the tip and tail with the ABS sidewall underfoot, resulting in enhanced edgehold and significantly lower swing and overall weight.Hybrid triple zone coreTwo high density wood stringers sit along ultralight wood with pre-installed ABS layers laid alongside the core, directly under foot. Unique to Armada AR50 constructions, these cores concentrate the weight of the ski below the boot sole, creating a light core with pop and solid edge hold, while keeping swing and overall weight down.EST park rockerThe next level!! Subtle rocker in the tips and tails, with positive camber underfoot. This enhances carving while also disengaging the tip and tail to create a catch-free feel that's ideal buttering and nose and tail presses.50/50 BaseAs the name implies, the 50/50 is faster than the S7 and more rugged than the Comp Series bases.CK stringerA blend of Carbon/Kevlar stringers that run along the tail of the ski to help stabilize it. This creates a better landing platform, especially when your weight is further back than you intended. It also increases snap and adds pop to ollies.Laminate matrixArmada know from the core out exactly how each ski should react, so three kinds of fibreglass laminates are used in combination to deliver the exact amount of flex and torsional rigidity. Bi-axial fibreglass runs in an "X" pattern down the ski to control lateral flex. Uni-directional fibreglass controls flex along the length of the ski. And tri-axial fibreglass, with fibres running in three directions, beefs up the centre of the ski. The permutations of the three fibreglasses are nearly limitless and allow Armada to precision tune the performance of every ski they make.1.7 Impact EdgeThe edge height and width is deliberately smaller and the steel is heat treated proprietary hardness to increase durability and decrease weight.
SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)A state-of-the-art, competition-ready, park-destroying tool! The creatively applied EST Park Rocker turns a ski that's stiff enough for huge landing and haul-arse speed into an all-mountain slasher. Already spawning imitators, the Alpha 1 was the first, and is the best, rockered park ski.FeaturesAR50 SidewallABS sidewall meets Cap construction - the best of both worlds. This engineering method combines the lightweight cap construction in the tip and tail with the ABS sidewall underfoot, resulting in enhanced edgehold and significantly lower swing and overall weight.Hybrid triple zone coreTwo high density wood stringers sit along ultralight wood with pre-installed ABS layers laid alongside the core, directly under foot. Unique to Armada AR50 constructions, these cores concentrate the weight of the ski below the boot sole, creating a light core with pop and solid edge hold, while keeping swing and overall weight down.EST park rockerThe next level!! Subtle rocker in the tips and tails, with positive camber underfoot. This enhances carving while also disengaging the tip and tail to create a catch-free feel that's ideal buttering and nose and tail presses.Comp series baseA World cup-inspired base that requires higher maintenance that the S7 base, the Cop series pays for the extra TLC it requires in one way: SPEED!CK stringerA blend of Carbon/Kevlar stringers that run along the tail of the ski to help stabilize it. This creates a better landing platform, especially when your weight is further back than you intended. It also increases snap and adds pop to ollies.Laminate matrixArmada know from the core out exactly how each ski should react, so three kinds of fibreglass laminates are used in combination to deliver the exact amount of flex and torsional rigidity. Bi-axial fibreglass runs in an "X" pattern down the ski to control lateral flex. Uni-directional fibreglass controls flex along the length of the ski. And tri-axial fibreglass, with fibres running in three directions, beefs up the centre of the ski. The permutations of the three fibreglasses are nearly limitless and allow Armada to precision tune the performance of every ski they make.2.5 Impact edge This edge had and oversized height and width and the steel is heat-treated to a proprietary hardness which helps resist breaking and tearing out from the rails, ledges and any other abuse it might meet.
SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)Creative application of EST park rocker to a park-specific chassis creates the next generation ski for carving between transitions, buttering of them, and floating beyond them, stable underfoot and loose and buttery at the tip and tails, the Halo slaughters the park!FeaturesAR50 SidewallABS sidewall meets Cap construction - the best of both worlds. This engineering method combines the lightweight cap construction in the tip and tail with the ABS sidewall underfoot, resulting in enhanced edgehold and significantly lower swing and overall weight.Hybrid triple zone coreTwo high density wood stringers sit along ultralight wood with pre-installed ABS layers laid alongside the core, directly under foot. Unique to Armada AR50 constructions, these cores concentrate the weight of the ski below the boot sole, creating a light core with pop and solid edge hold, while keeping swing and overall weight down.EST park rockerThe next level!! Subtle rocker in the tips and tails, with positive camber underfoot. This enhances carving while also disengaging the tip and tail to create a catch-free feel that's ideal buttering and nose and tail presses.S7 baseImproved for 10/11, the new S7 features a gliding additive for increased speed and longevity. Armada's toughest base, find the S7 base on any ski that's looking for rails, ledges, boxes as much as snow.CK stringerA blend of Carbon/Kevlar stringers that run along the tail of the ski to help stabilize it. This creates a better landing platform, especially when your weight is further back than you intended. It also increases snap and adds pop to ollies.Laminate matrixArmada know from the core out exactly how each ski should react, so three kinds of fibreglass laminates are used in combination to deliver the exact amount of flex and torsional rigidity. Bi-axial fibreglass runs in an "X" pattern down the ski to control lateral flex. Uni-directional fibreglass controls flex along the length of the ski. And tri-axial fibreglass, with fibres running in three directions, beefs up the centre of the ski. The permutations of the three fibreglasses are nearly limitless and allow Armada to precision tune the performance of every ski they make.2.5 Impact edge This edge had and oversized height and width and the steel is heat-treated to a proprietary hardness which helps resist breaking and tearing out from the rails, ledges and any other abuse it might meet.
SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)The legendary AR6 was the perfect everyday ski for the all-mountain park skier, and for years Armada didn't think it could be improved. Then they widened it a bit throughout and reconstructed it with AR50 sidewall to lower its swing weight. It was so impressive, it required a new name: The AR7FeaturesAR50 SidewallABS sidewall meets Cap construction - the best of both worlds. This engineering method combines the lightweight cap construction in the tip and tail with the ABS sidewall underfoot, resulting in enhanced edgehold and significantly lower swing and overall weight.Hybrid triple zone coreTwo high density wood stringers sit along ultralight wood with pre-installed ABS layers laid alongside the core, directly under foot. Unique to Armada AR50 constructions, these cores concentrate the weight of the ski below the boot sole, creating a light core with pop and solid edge hold, while keeping swing and overall weight down.Positive camberTraditional camber engages the tip and tail of the ski, enhancing ease of entry and exit into and out of a turn, while maintaining solid edge hold.S7 baseImproved for 10/11, the new S7 features a gliding additive for increased speed and longevity. Armada's toughest base, find the S7 base on any ski that's looking for rails, ledges, boxes as much as snow.CK stringerA blend of Carbon/Kevlar stringers that run along the tail of the ski to help stabilize it. This creates a better landing platform, especially when your weight is further back than you intended. It also increases snap and adds pop to ollies.Laminate matrixArmada know from the core out exactly how each ski should react, so three kinds of fibreglass laminates are used in combination to deliver the exact amount of flex and torsional rigidity. Bi-axial fibreglass runs in an "X" pattern down the ski to control lateral flex. Uni-directional fibreglass controls flex along the length of the ski. And tri-axial fibreglass, with fibres running in three directions, beefs up the centre of the ski. The permutations of the three fibreglasses are nearly limitless and allow Armada to precision tune the performance of every ski they make.2.5 Impact edge This edge had and oversized height and width and the steel is heat-treated to a proprietary hardness which helps resist breaking and tearing out from the rails, ledges and any other abuse it might meet.
SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)Positive camber gives the ARV a traditional all-mountain feel. It's lively edge-to-edge, stable through the arc of any turn, and has plenty of width to perform in the deep stuff.FeaturesABS sidewallThis construction method creates the highest performance skis Armada offer. Two strips of ABS material lie directly alongside the core and over the skis edges, providing unequalled edge hold, core protection, and stability.Double zone coreThe high density wood stringers sit along ultralight wood creating a light core with pop and solid edge hold, while keeping swing and overall weight down.Positive camberTraditional camber engages the tip and tail of the ski, enhancing ease of entry and exit into and out of a turn, while maintaining solid edge hold.50/50 BaseAs the name implies, the 50/50 is faster than the S7 and more rugged than the Comp Series bases.CK stringerA blend of Carbon/Kevlar stringers that run along the tail of the ski to help stabilize it. This creates a better landing platform, especially when your weight is further back than you intended. It also increases snap and adds pop to ollies.Laminate matrixArmada know from the core out exactly how each ski should react, so three kinds of fibreglass laminates are used in combination to deliver the exact amount of flex and torsional rigidity. Bi-axial fibreglass runs in an "X" pattern down the ski to control lateral flex. Uni-directional fibreglass controls flex along the length of the ski. And tri-axial fibreglass, with fibres running in three directions, beefs up the centre of the ski. The permutations of the three fibreglasses are nearly limitless and allow Armada to precision tune the performance of every ski they make.2.5 Impact edge This edge had and oversized height and width and the steel is heat-treated to a proprietary hardness which helps resist breaking and tearing out from the rails, ledges and any other abuse it might meet.
SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)Light, snappy, responsive, and quick, the El Ray is built for all-mountain riding but is nimble enough for regular laps through the park. It's powerful, durable, and versatile, priced so you can buy all the rounds after a day skiing with your friends. Pound for pound, dollar for dollar, the best skis money can buy!!!FeaturesCapThis method wraps the wood core with composite fibreglass layers that creating a torsional box. The base assembly is inserted in to the mold, and then the fibreglass wrapped core and top material added. A variable slant between the base and top sheet creates a super-durable and light ski with a balanced flex.Fleet coreSimilar to the Double zone core, but with a slow taper to 45 degrees towards the tip and tails. This eases entry and exit into and out of turns for lighter riders.Positive camberTraditional camber engages the tip and tail of the ski, enhancing ease of entry and exit into and out of a turn, while maintaining solid edge hold.S7 baseImproved for 10/11, the new S7 features a gliding additive for increased speed and longevity. Armada's toughest base, find the S7 base on any ski that's looking for rails, ledges, boxes as much as snow.Laminate matrixArmada know from the core out exactly how each ski should react, so three kinds of fibreglass laminates are used in combination to deliver the exact amount of flex and torsional rigidity. Bi-axial fibreglass runs in an "X" pattern down the ski to control lateral flex. Uni-directional fibreglass controls flex along the length of the ski. And tri-axial fibreglass, with fibres running in three directions, beefs up the centre of the ski. The permutations of the three fibreglasses are nearly limitless and allow Armada to precision tune the performance of every ski they make.2.5 Impact edge This edge had and oversized height and width and the steel is heat-treated to a proprietary hardness which helps resist breaking and tearing out from the rails, ledges and any other abuse it might meet.
SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)One word describes the ARW: Proven. Proven materials. Proven construction. Proven geometry. The result is proven performance, from the latest movie segments to the contest podium. Ready for the park ski standard bearer for woman? Prove it.FeaturesABS sidewallThis construction method creates the highest performance skis Armada offer. Two strips of ABS material lie directly alongside the core and over the skis edges, providing unequalled edge hold, core protection, and stability.Double zone coreThe high density wood stringers sit along ultralight wood creating a light core with pop and solid edge hold, while keeping swing and overall weight down.Positive camberTraditional camber engages the tip and tail of the ski, enhancing ease of entry and exit into and out of a turn, while maintaining solid edge hold.S7 baseImproved for 10/11, the new S7 features a gliding additive for increased speed and longevity. Armada's toughest base, find the S7 base on any ski that's looking for rails, ledges, boxes as much as snow.CK stringerA blend of Carbon/Kevlar stringers that run along the tail of the ski to help stabilize it. This creates a better landing platform, especially when your weight is further back than you intended. It also increases snap and adds pop to ollies.Laminate matrixArmada know from the core out exactly how each ski should react, so three kinds of fibreglass laminates are used in combination to deliver the exact amount of flex and torsional rigidity. Bi-axial fibreglass runs in an "X" pattern down the ski to control lateral flex. Uni-directional fibreglass controls flex along the length of the ski. And tri-axial fibreglass, with fibres running in three directions, beefs up the centre of the ski. The permutations of the three fibreglasses are nearly limitless and allow Armada to precision tune the performance of every ski they make.2.5 Impact edge This edge had and oversized height and width and the steel is heat-treated to a proprietary hardness which helps resist breaking and tearing out from the rails, ledges and any other abuse it might meet.
SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)The Coda is built for all-mountain ripping; from groomers to halfpipes to powder and park, it's designed for lighter skiers with developing strength, ideal for kids basically! FeaturesCapThis method wraps the wood core with composite fibreglass layers that creating a torsional box. The base assembly is inserted in to the mold, and then the fibreglass wrapped core and top material added. A variable slant between the base and top sheet creates a super-durable and light ski with a balanced flex.Fleet coreSimilar to the Double zone core, but with a slow taper to 45 degrees towards the tip and tails. This eases entry and exit into and out of turns for lighter riders.Positive camberTraditional camber engages the tip and tail of the ski, enhancing ease of entry and exit into and out of a turn, while maintaining solid edge hold.S7 baseImproved for 10/11, the new S7 features a gliding additive for increased speed and longevity. Armada's toughest base, find the S7 base on any ski that's looking for rails, ledges, boxes as much as snow.Laminate matrixArmada know from the core out exactly how each ski should react, so three kinds of fibreglass laminates are used in combination to deliver the exact amount of flex and torsional rigidity. Bi-axial fibreglass runs in an "X" pattern down the ski to control lateral flex. Uni-directional fibreglass controls flex along the length of the ski. And tri-axial fibreglass, with fibres running in three directions, beefs up the centre of the ski. The permutations of the three fibreglasses are nearly limitless and allow Armada to precision tune the performance of every ski they make.2.5 Impact edge This edge had and oversized height and width and the steel is heat-treated to a proprietary hardness which helps resist breaking and tearing out from the rails, ledges and any other abuse it might meet.
Comes with a patent pending removable grip system and a 55mm fixed basket. Armada use high quality lightweight 5083 aluminum shafts. The Triad pole come in one size and the quick-release grip system makes cutting the pole down to your required size a breeze.
Comes with a patent pending removable grip system and a 55mm fixed basket. Armada use high quality lightweight 5083 aluminum shafts. The Legion pole come in one size and the quick-release grip system makes cutting the pole down to your required size a breeze.
SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)Elf Shoe Tech - it's not just for fat skis anymore!! The very ideas behind the design that makes the ARG and the JJ so versatile has been brought to its logical conclusion in the new Alpha 1. This is the pirst park and pipe ski that incorporates rocker and extended tip and tail profile of Amarda's powder skis. While the loose feel and ridiculosly low swing weight make foor an ideal jibbbing tool, its lengthy sidecut still provides stability and edgehold on hardpack. Paired with Armada's to-of-the-line Comp Series base and Hybrid AR Core 2, The Alpha 1 doesn't just go places no park and pipe ski has gone before, it gets there faster and weighs less doing it. In ski disign terms, the era of reversed camber, variable sidecut skis was in its infancy. With the Alpha 1, the evolution has begun!Comfort Zone Park and PipeAll-Mountain.Features:AR Hybrid Core 2The AR50 cores come in two configurations similar to the AR Core 1 and 2, but the CNC shaped cores are engineered one step further. using exacting standards, Armada preinstally ABS layers into the wood core dirrectly underfoot. This core construction method creates a finished ski with sidewall underfoot and cap construction in the tip and tail to improve durability and lower swing weight.Elf Shoe TechArmada's patent-pending 5 dimensional design combines the progressive elements of tapered and rockered tips and tails, which dramatically enhance a ski's floation abilities while lowering its swing weight, with the proven qualities of a cambered sidecut underfoot. By playing with the amount of tapered rocker that is incorperated into each ski, Armada are able to to adapt the concept of Elf Shoe Tech to a variety of skis in the 09-10 lineup. The versatility 'ES Tech' gives Armada's widest powder specific modles breaks them out of that defind niche and opens them up to the whole mountain. And the performance advantages those same attributes give skis desgined for the park and pipe are truely game changing. With ES Tech, your powder skis rip right down to the lift line, amd your park skis bring you places you've never been before.AR50 SidewallABS Sidewall meets Cap construction - the best of both worlds. This engineering method combines the leightweight cap construction in the tip and tail with ABS sidewall underfoot, resulting in remarkably enhanced edgehold and significantly lowered swing and overall weight. The AR50 construction method is used exclusively in all models that feature the Elf Shoe Technology.2.5 Impact EdgeThis edge exists for one reason - its durable. This edge is disigned to resist breaking and tearing out from rocks, rails and any other abuse it might meet.Comp Series BaseThis world cup-inspired competition base is made for speed. It is high maintenance and designed for controlled environmental conditions like its race ski brethren.Related products:
Salomon STH12 Oversize Ski Binding
£140.00
Great binding for all you Freestyle/Freeride skiers out there with a DIN rating that goes up to 12 which will allow you to stomp the biggest kickers and cliff drops while still holding you safely as you ski around the mountain. The STH12 has Automatic Wing adjustment so no need to adjust the wings everytime you go out to shred the gnah! With the STH12 it comes compleate with an Oversized brake that will allow it to fit skis up to 110mm at the mounting point.DIN scale: 4-12find out more
Armada Ski Poles (09-10) (Now Available)
£40.00
Legion and Triad polesEach model comes with a patent pending removable grip system and a 55mm fixed basket. Armada use high quality lightweight 5083 aluminum shafts. The Triad and Legion pole come in one size and the quick-release grip system makes cutting the pole down to your required size a breeze.find out more
SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)Uncompromising performance, from the hard pack to powder to the transitions, boxes and rails of the terrain park and halfpipe. The ARV has experienced performance enchancements over the years and retains its award-winning spot as Amrada's all-mountain ski. It has width where you need it, sidecut to promote carving without inhibiting floatation, and a base that will withstand seasons of abuse. You are today's true skier and you require a ski that performs where ever you chose to take it. You require the ARV.Comfort Zone- All mountainFeatures:AR Core 2Armada redistributed the high density wood laminate stringers on the outer edge of the core and installed an ultr-light center laminate stringer. The end result of this configuration is a durable ski with considerably lighter swing and total weight.ABS ConstructionThis construction method creates the highest performance skis that Armada offer. Two strips of ABS material lie directly alongside the core and over the skis edges, providing unequaled edge hold, core protection, and added stability.2.5 Impact EdgeThis edge exists for one reason - its durable. This edge is disigned to resist breaking and tearing out from rocks, rails and any other abuse it might meet.50/50 BaseThis die-cut blend of two base materials is common ground. It is faster than S7, but dosen't require the maintenance of the comp series base.Related products:
SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)Your a budding park maestro and could make logs with bindings perform off hits and jibs, right? You couldn't possibly require something fancy like the AR6 - a ski that combines pop and durability with such a deft touch that a ripper like you might not even notice. Of course, you might notice when you're able to carve off icy early morning takeoffs without feeling a chatter. And you might notice that the S7 base accelerates on snow even after a season of sliding rails. And when you realize the AR Core 1 combines with the carbon/kevlar tail stringer to generate insane pop, you'll probably notice. Still, you can destroy the park on your old boards, so why woud you need the AR6? To take your park skiing to the next level, thats why!!Comfort Zone- Park/Pipe- Urban Jibs- All MountainFeatures:AR Core 1Armada redistributed two of the three high density wood laminate stringers in their most durable park-oriented core. This configuration lowers swing and overall weight while adding even more strength.ABS ConstructionThis construction method creates the highest performance skis that Armada offer. Two strips of ABS material lie directly alongside the core and over the skis edges, providing unequaled edge hold, core protection, and added stability.2.5 Impact EdgeThis edge exists for one reason - its durable. This edge is disigned to resist breaking and tearing out from rocks, rails and any other abuse it might meet.S7 BaseArmada's improved S7 base incorporates a new gliding additive for increased speed and minimal maintenance. this new base material also has a higher quality transparency which better displays the digitally printed base graphics. The S7 is Armada's toughest base!Related products:
Legion and Triad polesEach model comes with a patent pending removable grip system and a 55mm fixed basket. Armada use high quality lightweight 5083 aluminum shafts. The Triad and Legion pole come in one size and the quick-release grip system makes cutting the pole down to your required size a breeze.
RRP £352.00..............Our Sale Price £252.00SAVE £40.00 WHEN YOU ORDER THIS SKI AND THE RECOMMENDED SKI BINDING!!!PROVIDE US WITH THE FOLLOWING INFORMATION AND WE WILL SET-UP THE SKIS & BINDINGS FOR YOU BEFORE THEY ARE SHIPPED!!! (Height, Weight, Skiing Ability, Boot Sole Length in mm and Age if over 50)The T-Hall is Armada's premier park stick. The burly re-designed AR Core 1 is super-solid under foot, but profiled toward the tip and tail for butterage.Stomp the hell out of your tricks and rails with confidence. The T-Hall slides on the toughest base and edges we offer. Hmmm, where do you think all this great input came from? Maybe it's from the best skier on the planet.Most park skis provide pop and durability and call it a day. If Tanner Hall settled for that sort of thing, he wouldn't be the defining skier of his generation. His pro model features a unique flex pattern and core profile designed to bring skiing places it's never been before. This ski doesn't just make carving takeoffs and buttered tricks possible - it makes them easier. If you're the kind of skier constantly looking for new ways off the lip and onto the box; if you're the kind of skier with a style that's recognizable on any feature in the park, if you're the best skier on the hill or simply aspire to be, the T-Halls provide the keys to the kingdom. It's up to you to walk through that door. T-Hall Comfort Zone- Park/Pipe- Urban Rails- Butters and press- Thrashed Park featuresFeatures- ABS Sandwich Construction- AR Core 1 - S7 Base- 2.5 Impact EdgeRelated products: